Skip to main content

Charging instructions EV Box HPC

Charging with a charging card

1. START CHARGE

  • Touch the display to select your desired language.
  • Select the connector type you need.
  • Hold your charging card against the display for a maximum of 5 seconds and wait for the connection check.
  • Connect your vehicle and press "OK" on the display.
  • The loading process will start and you will receive information about the loading process.
  • Note: If you return to the start screen, you must select the language again if you want information about the charging process.

2. STOP CHARGING

  • Press “Exit” on the display.
  • Unplug your vehicle.

Charging via app

1. START CHARGING PROCESS

  • Plug the charging cable into the vehicle only first.
  • Select charging point:
    • with charging network card
    • or using the “Scan & Charge” function by scanning the QR code on the plug
  • Press the START button to start charging.
  • After successful authorization, the charging process starts automatically.

2. END CHARGING PROCESS

  • Press the STOP button.
  • Unplug the vehicle.

Important

  • The security check between the vehicle and the charging station can take up to 30 seconds.

  • A combination of the activation methods is not possible - for example, if charging was started via app, it must be ended via app too.

  • In case of malfunctions, please contact our service team by phone: +43 5 031 351 855.